How Do Optimizing Saws Help Your Shop Cut Faster, Waste Less, and Stay Accurate?
Walk through any cabinet or truss shop at the end of a shift and look at the scrap bin. You can usually tell how well the saw line is running just from what’s in there. Short offcuts that could have been parts, boards cut a hair too long, pieces tossed because someone misread a tape. This is where optimizing saws earn their keep. They take a cut list, look at the material you actually have on the rack, and work out the best way to cut it. The operator stops guessing, and the saw stops wasting good stock. At RazorGage, this idea has been the heart of the product line since 2001. What an Optimizing Saw Actually Does A regular upcut saw cuts where you tell it to cut. That’s it. An optimizing saw adds a bit of thinking on top. It takes your cut list, checks the board in front of it, and decides which parts fit best before a single cut is made. The usual workflow goes like this. An operator looks over each board and marks the bad spots with a crayon, things like knots, splits, or stain. Th...